Teflon PCB in high-end electronic products are made of Teflon laminate material, which is resistant to acids and bases and various organic solvents, and is insoluble in almost all solvents. At the same time, Teflon material has the property of high temperature resistance and its dielectric coefficient is very low, which is the ideal high frequency PCB material for high frequency Teflon PCB.

Radar PCB is a PCB substrate used in radar,commonly used in communication radar PCB,detection radar PCB,millimeter-wave radar PCB,etc.

The cavity PCB is used for the power divider; the main technical parameters of the power divider include power loss, voltage VSWR of each port, isolation between distribution ports, power capacity and bandwidth, etc.

Rogers is an American material company. The hygroscopicity of Rogers PCB dielectric constant is very stable with the electrical and thermal properties of substrate materials. Rogers PCB laminates produced by Rogers are mostly used for high-frequency microwave PCB fabrication.The PCB prototypes that need to use Rogers PCB material fabrication are collectively called Rogers PCB by SSPCB.

Rogers 4350B PCB is a high frequency PCB, RO 4350B is a material manufactured by Rogers with a dielectric constant of 3.48. The main material finished is a carbide/ceramic laminate.

High frequency microwave circuit board is a special electromagnetic frequency circuit board for high frequency (more than 300MHZ frequency or wavelength less than 1M) and microwave (more than 3GHZ frequency or wavelength less than 1M) in the PCB field.

Microwave circuits are circuits that operate in the microwave and millimeter wave bands and consist of microwave passive components, transmission lines, and interconnects integrated on a substrate with certain functions.

Antenna PCB is the part of PCB used for wireless receiving and transmitting, antenna is the transducer. ssPCB provides antenna PCB, mainly used for GPS antenna PCB, WiFi antenna PCB, NB-loT antenna PCB, FPC antenna, 5G antenna PCB.

PTFE PCB is now widely used in chemical, pharmaceutical, dye industry containers, storage tanks, reaction tower kettle, large pipeline anti-corrosion lining materials; machinery, construction, aerospace, military, communications, traffic bridge slider, guide rail; printing and dyeing, light industry, textile and other industries of anti-stick materials.

Rogers 4350B High Frequency PCB is a hydrocarbon laminate with a dielectric constant of 3.48.

RO3003 series laminates are circuit materials with consistent mechanical properties, and their dielectric constants remain stable over a wide temperature range.

PTFE High Frequency PCB has wider DK, lower tangent value of DF angle, increased resistance value and more stable performance compared to PTFE PCB.